Zywell Zy905 LAN Connection

Zywell Zy905 LAN Connection

This document describes the connection and setup procedures for the Zywell Zy905 LAN printer.

Printer Self-Test Page

Connect Printer to Computer

Connect the printer to the computer using a USB cable as shown in the image.

Note: Keep the printer powered on.

Install Printer Driver

Double-click the driver file PrinterTest.exe to complete driver installation.

Print Self-Test Page

After driver installation, double-click PrinterTest.exeSet communication port to USB Tap Advanced.

In Advanced settings, find and tap Set Net.

On the Net Setting page, enter SSID (Wi‑Fi name) and Wi‑Fi Key (Wi‑Fi password) under WIFI SettingTap Set above contents.

The printer will automatically print a self‑test page. Record the IP Address shown on it.

Connect Zywell Zy905 LAN Printer

Configure Network

Go to the device’s Wi‑Fi settingsSelect the same Wi‑Fi network used by the Zywell Zy905 LAN printer.

Add Zywell Zy905 LAN Printer

Open POSTap the three‑line menu in the top‑leftTap Settings.

On the Settings page, tap PrintTap Add Printer in the top‑right corner.

  From the printer model list, select ZyWell Zy905 LAN，tap Confirm.

In the Parameter Settings, enter the IP Address printed on the self-test page into the IP Address field.

In the Apply to section, enable the corresponding printer types, such as Receipt printer, Invoice printer, and others.

After finishing the setup, tap Print test page When the pop-up prompt "Find and connect devices on your local network" appears, tap Allow.

Once the system prompts Print test page succeeded, the configuration is complete.  Tap Save.